DWDaniel WallerEngineering. Leadership. Stories.
All Factory Floor stories

Lessons from the Factory Floor / 15

Just because a machine is guarded doesn’t mean it’s safe.

The guard worked perfectly.

Open it.

The machine stopped.

Exactly as it should.

Except the machine wasn’t safe.

During a routine service on one of our milling machines, we discovered something that completely changed the way I looked at safety modifications.

At some point in the machine’s life, additional guarding had been fitted.

At first glance, everything worked.

Open the guard.

Machine stops.

Test passed?

Not quite.

When we investigated the safety circuit, we discovered the aftermarket guarding had compromised the original safety function.

And the dangerous part wasn’t what happened when the guard opened.

It was what happened when it closed.

The machine restarted automatically.

No manual reset.

No deliberate command from the operator.

Imagine someone opens that guard to investigate a fault.

The machine stops.

They’re inside the hazardous area.

Someone else walks past and closes the guard — or simply leans against it.

The machine could restart.

The machine was locked off immediately.

Production lost a machine.

Engineering gained a difficult decision.

But some decisions shouldn’t be difficult.

Production can recover from downtime. A person may not recover from getting this decision wrong.

The machine stayed out of service until the safety system could be upgraded with a programmable safety relay and the correct safety function restored.

It wasn’t the quickest solution.

It was the right one.

That experience reinforced something I’ve carried with me ever since:

A machine stopping when a guard opens does not prove the safety system is safe.

You need to understand what happens next.

How does it reset?

How can it restart?

What happens after a power interruption?

What assumptions were made by whoever modified it?

Because sometimes the most dangerous fault isn’t the one that stops a machine.

It’s the one that makes you believe the machine is safe.

Lesson #15: Never assume a safety modification has improved a machine. Verify that it hasn’t compromised the original safety function.

Have you ever uncovered a modification that created more risk than it removed?